audiometry การใช้

• Monitoring can be completed through performing otoacoustic emissions testing or high frequency audiometry.
• Often visualization is combined with audiometry or speech analyzation.
• To make the test less boring, Moran used a technique called conditioned play audiometry.
• When audiometry is applied to industry, audiometrists are sometimes also called Occupational Hearing Conservationists.
• The word " Audiometrist " is derived from the word Audiometry, as distinct from Audiology.
• Audiometry shows a progressive sensineural deafness.
• In pure tone audiometry, an audiometer is used to play a series of tones using headphones.
• Note : the Weber and Rinne are screening tests that are not replacements for formal audiometry hearing tests.
• Recommended Procedure : Pure Tone air and bone conduction threshold audiometry with and without masking and determination of uncomfortable loudness levels.
• Therefore, high frequency audiometry is an effective method of monitoring losses that are suspected to have been caused by these factors.
• Therefore, conventional audiometry is ear specific, with regards to both air and bone conduction audiometry, when masking is applied.
• Therefore, conventional audiometry is ear specific, with regards to both air and bone conduction audiometry, when masking is applied.
• Sound field audiometry may be more suitable when patients are unable to wear earphones, as the stimuli are usually presented by loudspeaker.
• Similar symptoms are also associated with other kinds of hearing loss; audiometry or other diagnostic tests are necessary to distinguish sensorineural hearing loss.
• Identification of sensorineural hearing loss is usually made by performing a pure tone audiometry ( an audiogram ) in which bone conduction thresholds are measured.
• "' Audiometry "'( from, " to hearing loss or diseases of the ear, and often make use of an audiogram.
• The test should not be used to assess the sensitivity of hearing and the results of this test should always be viewed in conjunction with pure tone audiometry.
• Conventional audiometry tests frequencies between 250 hertz ( Hz ) and 8 kHz, whereas high frequency audiometry tests in the region of 8 kHz-16 kHz.
• Conventional audiometry tests frequencies between 250 hertz ( Hz ) and 8 kHz, whereas high frequency audiometry tests in the region of 8 kHz-16 kHz.
• There are variations of conventional audiometry testing that are designed specifically for young children and infants, such as behavioral observation audiometry, visual reinforcement audiometry and play audiometry.