austenitic การใช้

• :* 200 Series austenitic chromium-nickel-manganese alloys.
• Work hardening can make austenitic stainless steels slightly magnetic.
• Some austenitic stainless steels and nickel-based alloys are prone to intergranular corrosion.
• The turbine was made of solid Inconel blades attached to an austenitic steel hub.
• The lower loops of hottest superheaters can be made of austenitic material, with better corrosion resistance.
• Kolsterising provides a way to surface harden austenitic stainless steels, without affecting the inherent corrosion resistance.
• Manganese preserves an austenitic structure in the steel, similar to nickel, but at a lower cost.
• Austenitic stainless steels must be quenched to become fully corrosion resistant, as they work-harden significantly.
• The material has to undergo heat treatment involving tempering to develop the required austenitic microstructure, with subsequent tempering.
• The stainless steel alloy 439 is austenitic stainless steel alloy 316L is used providing an increased corrosion resistance to chlorides.
• The highest strengths available on any steel have been recorded on small-diameter cold-drawn austenitic stainless wire.
• Austenitic stainless retains its non-magnetic crystal structure at room temperature, usually because it has high nickel content.
• In the extreme case of austenitic stainless steel, much higher alloy content makes this structure stable even at room temperature.
• Such a stabilized titanium-bearing austenitic chromium-nickel-copper stainless steel is shown in U . S . Pat.
• Austenitic stainless steel can be tested by nondestructive testing using the dye penetrant inspection method but not the magnetic particle inspection method.
• In higher-alloy steels such as austenitic stainless steel, the onset of transformation can require temperatures much lower than room temperature.
• Fingerprint resistant austenitic grade EN 1.4301 ( ASTM 304 ) was also supplied by Outokumpu for interior window and door frames.
• Testing has been conducted on candidate Ni-based alloys, austenitic steels, ferritic steels and ceramics for corrosion resistance in s cycles.
• When martensite is reverted to austenite by heating, the original austenitic structure is restored, regardless of whether the martensite phase was deformed.
• But it says here that only austenitic ss is non magnetic-- talk ) 23 : 20, 26 December 2007 ( UTC)