coaxially การใช้

• A 30 mm 2A72 autocannon is mounted coaxially with the 2A70 rifled gun.
• It is mounted coaxially with an optic rangefinder.
• An FG-126 infra-red searchlight is mounted coaxially to the 30 mm cannon.
• A Type 59T 7.62 mm machine gun is mounted coaxially with the main gun.
• This will, in turn, mean that the bullet does not exit the barrel coaxially.
• For night surveillance a 500, 000 candlepower searchlight is coaxially mounted to the 20 mm cannon.
• The regulator is a moveable lever mounted on the balance cock or bridge, pivoted coaxially with the balance.
• Two 7.62mm NATO machine guns are also installed in the turret, one coaxially mounted with the main gun.
• The gunner optics, which can be completely protected with a slide hatch, are mounted coaxially to the main gun.
• Mounted in front of the gunner's hatch on the turret is the ubiquitous coaxially to the left of the main gun.
• The main gun was placed in a centrally placed turret along with a coaxially mounted 7.62 mm DTM light machine gun.
• A high power laser is used to melt metal powder supplied coaxially to the focus of the laser beam through a deposition head.
• The SAM riboswitch is organized about a four way junction, with two sets of coaxially stacked helices arranged side-by-side.
• The M8 is armed with the XM35 rifled autoloading 105 mm cannon main gun with an M240 7.62 mm machine-gun mounted coaxially.
• The orientation of the coaxially stacked stems in the influenza pseudoknot, however, differs from the most common topology in " classical " RNA pseudoknots.
• I need a formula for calculating the electric field ( volts per metre ) just outside a round pipe located coaxially inside a larger rectangular section pipe.
• The M13 was also armed with three or four machine-guns : one coaxially with the main gun and two in the forward, frontal ball mount.
• The individual lengths of fuel cladding were directed onto movable transports, where they were aligned coaxially with the axes of associated handling equipment at appropriate production stations.
• An LMCO 801 field coil compression driver with a 1.75 " diaphragm was used as is for HF reproduction and mounted coaxially to the back of the 287 motor.
• When cocked, loaded, and closed; the recoil spring, positioned coaxially around the barrel, provides the pressure necessary to lock the barrel and slide together via the rollers.