interposer การใช้

• When a key is pressed, its interposer is moved by the motor.
• A common example of an interposer is an FR4 for rigid, and polyimide for flexible.
• Interposer comes from the Latin word " interpM
  nere ", meaning " to put up between ".
• Each interposer has a unique combination of lugs, corresponding to the binary code for the desired character.
• The individual FPGA dies are conventional, and are flip-chip mounted by microbumps on to the interposer.
• When a typewriter key is pressed, it moves a metal bar ( interposer ) down that has several lugs.
• An "'interposer "'is an electrical interface routing between one socket or connection to another.
• The purpose of an interposer is to spread a connection to a wider pitch or to reroute a connection to a different connection.
• It distinctively used a ceramic interposer much like the Thunderbird instead of the organic pin grid array package used on all later Palomino processors.
• When the typist presses a key, a pawl on the key lever depresses a matching metal bar ( interposer ) for that key.
• The interposer, which is oriented front to back in the machine, has one or more short projections ( lugs ) protruding from its bottom edge.
• After a character is struck on the paper, the mechanism is reset, including replacing all latches on their bails and moving the interposer back into position.
• When the interposer moves, each of its lugs engages one of a set of bars ( selector bails ) that run from left to right across the keyboard mechanism.
•  The word Gazelem appears to have its roots in Gaz-a stone and Aleim, a name of God as a revelator or interposer in the affairs of men.
• Pressing two keys several milliseconds apart allows the first interposer to enter the tube, tripping a clutch which rotated a fluted shaft driving the interposer horizontally and out of the tube.
• Pressing two keys several milliseconds apart allows the first interposer to enter the tube, tripping a clutch which rotated a fluted shaft driving the interposer horizontally and out of the tube.
• Xilinx's approach stacks several ( three or four ) active FPGA die side-by-side on a silicon interposer  a single piece of silicon that carries passive interconnect.
• Each negative logic selector bail that is displaced by the interposer in turn pulls a latch interposer and link which causes a selector latch near the cycle shaft to be pulled away from the latch bail.
• Each negative logic selector bail that is displaced by the interposer in turn pulls a latch interposer and link which causes a selector latch near the cycle shaft to be pulled away from the latch bail.
• When a key was depressed, an interposer, beneath the keylever, was pushed down into a slotted tube full of small metal balls ( called the " compensator tube " ) and spring latched.