intonaco การใช้

• "Le Trident " features fa鏰des of white intonaco and roof terraces.
• The new complex designs would help hide the lines and cracks that was caused by the intonaco.
• At the outset, the plaster, " intonaco ", began to grow mold because it was too wet.
• Painting took place immediately after the intonaco was spread in order to allow the paint to seep into the plaster for a deeper effect.
• The scope of the work was to consolidate some areas of the intonaco at the eastern end of the building and partially remove the soot and dirt.
• Complex, detailed frescoes were needed where intonaco was spread because it would overlap with existing frescoes causing lines, easily shown in the details of Hellenistic styled frescoes.
• If mistakes have been made, it may also be necessary to remove the whole intonaco for that area or to change them later, " a secco ".
• For wholly " a secco " work, the intonaco is laid with a rougher finish, allowed to dry completely and then usually given a key by rubbing with sand.
• The artists would drill holes into the walls 9.3 meters above the floor to hold their scaffolding then spread intonaco ( plaster ) to reinforce and secure layers below the current working surface.
• The plaster, or intonaco, on which the paintings were executed was found, for the most part, to be secure, as previous restorers had fixed it in places with bronze pins.
• Once a " giornata " is dried, no more " buon fresco " can be done, and the unpainted intonaco must be removed with a tool before starting again the next day.