ipv4 การใช้

• The source and destination addresses are those of the IPv4 header.
• The source and destination addresses are those in the IPv4 header.
• If necessary, GNUnet can perform IPv4-IPv6 IPv6 transition.
• The IPv4 implementation in Linux defaults to the weak host model.
• The radio is an IPv4-compliant three-port antennas.
• Instead of using the IPv4 address, use the IPv6 address.
• This system is Internet Protocol version 4, or IPv4.
• IP protocol 41 indicates IPv4 packets which encapsulate IPv6 datagrams.
• OSPF version 3 introduces modifications to the IPv4 implementation of the protocol.
• Teredo routes these datagrams on the IPv4 Internet and through NAT devices.
• They are network protocol agnostic, and support both IPv4 and IPv6.
• The myIpAddress function assumes that the device has a single IPv4 address.
• The framework of IPv4 / IPv6 translation is defined in RFC 6144.
• See IPv4 # Address _ representations for an explaination of the IPs.
• IPv4 is a connectionless protocol for use on packet-switched networks.
• Therefore, IPv6 has a vastly enlarged address space compared to IPv4.
• IPv6 is not directly interoperable by design with IPv4.
• The term " subnet mask " is only used within IPv4.
• Unlike with IPv4, routers never fragment a packet.
• IPv4 is described in RFC 791 ( 1981 ).