shafting การใช้

• On the roof there are grouped chimneys with decorative shafting.
• The cast iron breastshot waterwheel drove three pairs of stones through wooden shafting.
• During this period of time the propeller shafting and associated wheels were overhauled.
• Shafting was carried on brackets attached to the beams.
• Shafting usually involves about 1.5 ml of fluid mixed with the drug.
• Whilst off Mauritius her starboard outboard shaft fractured and she lost her screw and shafting.
• The specialties are   Union Refined bar, and cold-straightened shafting . 
• One mid 19th century factory had 1, 948 feet of line shafting with 541 pulleys.
• Until the 1920s, the mill was also powered by awater wheel which powered overhead shafting.
• They provide a reduction volume, multiple kinematic combinations, purely torsional reactions, and coaxial shafting.
• Propeller production includes controllable-pitch propeller ( CPP ), blades, and lines of shafting.
• However, it still had disc / roller integrators as well as shafting to interconnect the mechanical elements.
• William Fairbairn addressed the problem of line-shafting and was responsible for improving the efficiency of the mill.
• The mill was originally built to run on hydropower, transmitted from water turbines throughout the building by mechanical shafting.
• As it stated in a joint NASA-Boeing publication the new aircraft gearbox will incorporate composite shafting and structural housing.
• The shafting for the machinery was under the floor, as was a tramway for trucks to remove the cutting waste.
• Between the late 19th and mid-20th centuries, individual electric motors at each lathe replaced line shafting as the power source.
• Unlike the Shay, Heisler's design did not have a continuous string of line shafting running the length of the engine.
• The rotors were constructed on site, while the casings and shafting was constructed in John Brown's Atlas works in Sheffield.
• In early factory electrification only large motors were available, so new factories installed a large motor to drive line shafting and millwork.