tachometric การใช้

• An example of tachometric AA fire control would be the USN Mk 37 system.
• The Navy asked him to replace the bombsight with a tachometric design on the same stabilizer.
• These valves are usually both connected to the output of the tachometric relay or oil pressure switch.
• In virtually all systems, the injection control system integrates the tachometric relay and closed loop feedback functions.
• The Norden worked in an entirely different fashion, based on the " synchronous " or " tachometric " method.
• On bi-fuel, the switch used to change between fuels is used to turn off the tachometric relay.
• Although the US put the most effort into development of the tachometric concept, they were also being studied elsewhere.
• The RN moved quickly to add true tachometric target motion prediction and radar ranging to the HACS by mid 1941.
• The key component of this system, and other tachometric designs, was the ball-and-disk integrator.
• These " tachometric " or " synchronous " bombsights were an area of considerable research during the 1930s.
• Later in World War II, tachometric bombsights were often combined with radar systems to allow accurate bombing through clouds or at night.
• This led to a debate within the RAF whether to use their own tachometric design, the Stabilized Automatic Bomb Sight, or use the Mk.
• Where solenoids are fitted to the outputs of fuel tanks, these are also connected to the output of the tachometric relay or oil pressure switch.
• Eliminating this error through the direct measurement of ground speed ( instead of calculating it ) was a major advance in the tachometric bombsights of the 1930s and 40s.
• That was because an entirely new class of " tachometric " bombsights were being developed, which offered dramatically improved accuracy and automated much of the setup.
• The early RN High Angle Control System ( HACS ) I through IV and the early Fuze Keeping Clock ( FKC ) were examples of non-tachometric systems.
• In most modern installations, an electronic device called a " tachometric relay " or " safety switch " is used to operate electrical shut-off solenoids.
• The term tachymetric should more properly be spelled as " tachometric " which comes from the Greek " takhos " = speed, and " metric " = measure, hence tachometric, to measure speed.
• The term tachymetric should more properly be spelled as " tachometric " which comes from the Greek " takhos " = speed, and " metric " = measure, hence tachometric, to measure speed.
• All of these designs collectively became known as " tachometric sights ", " tachometric " referring to the timing mechanisms which counted the rotations of a screw or gear that ran at a specified speed.