baseband การใช้

• There is no baseband audio or video input to the translator.
• Digital baseband signals are carried over fiber, using CPRI standard.
• The frequencies subtract, producing the baseband signal for that channel again.
• Demodulation takes place at baseband using low-pass filters and amplifiers.
• MultiLevel optical recording is an example of baseband pulse-amplitude modulation.
• The second switching stage mixes the intermediate frequency to baseband.
• A baseband processor typically uses its own RAM and firmware.
• In an OFDM system, the baseband signal consists of several subcarriers.
• This composite baseband signal is typically used to modulate a main RF carrier.
• In many commercial data radio applications, audio baseband modulation is not used.
• This baseband, however, does not represent a group-level baseband.
• This baseband, however, does not represent a group-level baseband.
• These are the basic components that are required for baseband processing of signals.
• The 27 MHz carrier was easily combined and split from the baseband video.
• Modulation of a sine waveform transforms a baseband message signal into a passband signal.
• This recovers the scaled original spectra at baseband.
• Target recognition was done for years by playing the baseband signal to the operator.
• The loops carry baseband audio-frequency currents; no carrier signal is used.
• Plextek RFI designed ICs cover baseband to 100 GHz and utilise the following technologies:
• AFSK differs from regular frequency-shift keying in performing the modulation at baseband frequencies.